Marideck Marine Solvent Based Adhesive (1 Gallon)

MariDeck adhesive for aluminum and fiberglass floors

MariDeck adhesive MD-102 is a solvent-based glue made specifically for MariDeck flooring. Use it when the floor under the vinyl is aluminum or fiberglass. One gallon covers 50 to 60 square feet.

Why use MariDeck adhesive?

MariDeck recommends its own adhesive. If you use a different one, it must be PVC-compatible, or it can affect how the vinyl looks, bonds and performs. The right product depends on the floor surface, not on the vinyl. Therefore, use MD-102 on aluminum, fiberglass and sealed wood, and water-based MD-101 on unsealed plywood.

How to apply MD-102

1. Clean the area of all debris. A smooth, dry surface works best.
2. On aluminum or fiberglass, you will usually need to pre-cut the vinyl to fit each area. Therefore, measure carefully first.
3. Roll the adhesive evenly onto both the vinyl and the floor with a paint roller, and avoid puddling.
4. Let it set for 10 to 15 minutes, until it feels only slightly tacky to your finger. However, do not wait longer than 15 minutes.
5. Then roll the flooring over the glue.
6. Finally, apply even pressure with a heavy roller, a heavy pipe or a push broom.

Safety and returns

Solvent-based adhesives are flammable, so use caution and follow all of the manufacturer’s instructions. In addition, this product is nonreturnable, because shipping companies list it as HAZMAT.

Flooring that uses this MariDeck adhesive

Use MD-102 on aluminum, fiberglass and sealed wood floors under 34 mil, 80 mil and woven MariDeck vinyl flooring. For DuraVinyl flooring, however, use 390 Professional adhesive instead.

A third-generation family business

BoatVinyl.com is run by a third-generation family business. Our company started in 1947 in the auto industry, and our family’s boating roots go back to the 1950s, when my wife’s grandfather built boats.